Supported coding options

BMW X3
F25 from 2010
Acoustical confirmation
  • Acoustical lock/unlock confirmation

    Enable/disable the acoustical confirmation when the car is locked/unlocked.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Roof Function Center” FZD__04

  • Checkbox acoustical lock confirmation

    Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” ECU is set to “Active“ also. To make this work, the car has to be equipped with an alarm system.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_CICHB or “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Confirmation sound duration

    The duration of the confirmation sound that is played when locking/unlocking the car.

    Values:

    • Short
    • Normal
    • Long
    • Very long

    For this option the following control unit has to be available in the car: “Roof Function Center” FZD__04

  • Confirmation sound frequency

    The frequency of the confirmation sound that is played when locking/unlocking the car.

    Values:

    • Low
    • Normal
    • High

    For this option the following control unit has to be available in the car: “Roof Function Center” FZD__04

  • Confirmation sound volume

    The volume of the confirmation sound that is played when locking/unlocking the car.

    Values:

    • Low
    • Normal
    • High
    • Very high

    For this option the following control unit has to be available in the car: “Roof Function Center” FZD__04

Active Cruise Control
  • Active Cruise Control default distance

    The default distance level of the Active Cruise Control on activation.

    Values:

    • Level 1
    • Level 2
    • Level 3
    • Level 4

    For this option the following control unit has to be available in the car: “Integrated Chassis Management” ICMQL

Air conditioning
  • Air circulation setting memory

    Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Air Conditioning” IHKA_HIGH

  • Air conditioning on in AUTO mode

    Enable/disable the automatic activation of the air conditioning when the AUTO mode is turned on.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Air Conditioning” IHKA_HIGH

  • Air conditioning setting memory

    Enable/disable storing of the air conditioning setting. If this function is active, the last used air conditioning setting will be restored during the next start of the car.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Air Conditioning” IHKA_HIGH

Alarm system
  • Alarm sound

    The alarm sound that is played when the alarm is triggered.

    Values:

    • Alarm sound Europe
    • Alarm sound Great Britain
    • Alarm sound USA

    For this option the following control unit has to be available in the car: “Roof Function Center” FZD__04

Ambient lighting
  • Ambient lighting brightness

    The brightness of the ambient lighting.

    Values:

    • 10%
    • 20%
    • 30%
    • 40%
    • 50%
    • 60%
    • 70%
    • 80%
    • 90%
    • 100%

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

Angel eyes
  • Angel eyes brightness low beam

    The brightness of the angel eyes with low beam.

    Values:

    • 6 V
    • 6%
    • 7 V
    • 7,4 V
    • 8%
    • 10%
    • 11,7 V
    • 13 V
    • 13 V
    • 16%
    • 100%

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Angel eyes brightness low beam

    The brightness of the angel eyes with low beam.

    Values:

    • 10%
    • 20%
    • 30%
    • 40%
    • 50%
    • 60%
    • 70%
    • 80%
    • 90%
    • 100%

    For this option the following control unit has to be available in the car: “Headlight Driver Module left” TMS_03 or “Headlight Driver Module right” TMS_03

  • Angel eyes brightness parking lights

    The brightness of the angel eyes with parking lights.

    Values:

    • 10%
    • 20%
    • 30%
    • 40%
    • 50%
    • 60%
    • 70%
    • 80%
    • 90%
    • 100%

    For this option the following control unit has to be available in the car: “Headlight Driver Module left” TMS_03 or “Headlight Driver Module right” TMS_03

Audio
  • Maximum volume at start-up

    The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.

    Values:

    • 10%
    • 20%
    • 25%
    • 30%
    • 40%
    • 50%

    For this option the following control unit has to be available in the car: “Headunit” HU_CICHB or “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Ringtone

    The ringtone that is used in case of an incoming call.

    Values:

    • BMW i ringtone
    • BMW ringtone
    • Mini ringtone
    • Smartphone ringtone

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Shut off iDrive system when driver door is opened

    Enable/disable the automatic shut-off of the iDrive system when the driver door is opened.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Warning chime

    The warning chime that sounds when a warning is displayed in the car.

    Values:

    • BMW i warning chime
    • BMW warning chime
    • Mini warning chime

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

Auto Start Stop function
  • Auto Start Stop function memory

    Save the last used Auto Start Stop function setting for the next start of the car.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Auto Start Stop function off by default

    Set the Auto Start Stop function to off by default when the car is started.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

Brake Force Display
  • Brake Force Display activation brake force

    The brake deceleration at which the Brake Force Display is activated.

    Values:

    • Weak braking (5 m/s²)
    • Medium braking (7 m/s²)
    • Hard braking (8 m/s²)

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Brake Force Display activation speed

    The speed at which the Brake Force Display is activated.

    Values:

    • 5 km/h
    • 10 km/h
    • 20 km/h
    • 30 km/h
    • 40 km/h
    • 50 km/h

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Brake Force Display flashing frequency

    The flashing frequency of the Brake Force Display.

    Values:

    • 3 times per second
    • 5 times per second

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

Convenient opening/closing
  • Convenient closing

    Enable/disable the convenient closing. During convenient closing the windows are closed and the power folding mirrors are folded. To trigger convenient closing the lock button on the remote control has to be pressed and held.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient closing delay

    The delay for the convenient closing before the windows are closed.

    Values:

    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • No delay

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient closing delay front windows

    The delay at which the front windows are closed during convenient closing.

    Values:

    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • No delay

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient closing delay sunroof

    The delay as of with the sunroof is closed during convenient closing.

    Values:

    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • 3.5 seconds
    • No delay

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient closing with Comfort Access

    Enable/disable the convenient closing with the Comfort Access. For convenient closing with the Comfort Access the door handle has to be touched and held at the ribbed surface.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient closing with remote control

    Enable/disable the convenient closing with the remote control. For convenient closing with the remote control, the lock button has to be pressed and held.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient opening

    Enable/disable the convenient opening. During convenient opening the windows are opened and the power folding mirrors are unfolded. For a convenient opening the unlock button on the remote control has to be pressed and held. When using Comfort Access, the door handle has to be gripped and held.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient opening delay rear windows

    The delay at which the rear windows are opened during convenient opening.

    Values:

    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • No delay

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient opening delay sunroof

    The delay as of with the sunroof is opened during convenient opening.

    Values:

    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • 3.5 seconds
    • No delay

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Convenient opening with remote control

    Enable/disable the convenient opening with the remote control. For convenient opening with the remote control, the unlock button has to be pressed and held.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

Daytime running lights
  • Checkbox daytime running lights

    Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running lights on or off.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_CICHB or “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Daytime running lights brightness

    The brightness of the daytime running lights.

    Values:

    • 10%
    • 20%
    • 30%
    • 40%
    • 50%
    • 60%
    • 70%
    • 80%
    • 90%
    • 100%

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Daytime running lights mode

    The mode of the daytime running lights.

    Values:

    • Deactivated
    • Norther country comfort
    • Rings and taillights (ECE Xenon
    • Rings and taillights (US Xenon)
    • Rings without taillights (ECE)
    • Rings without taillights (US)
    • Via high beam (US halogen, without taillights)
    • Via low beam

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

Display options iDrive system
  • Display full text messages

    Enable the full display of text messages while driving. Use a backup to revert this coding once it has been applied.

    Values:

    • Active

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Pressure and temperature in tyre pressure monitor

    Enable/disable the pressure and temperature in the tyre pressure monitor in the iDrive system. Please note that the car has to be equipped with the required sensors.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_CICHB

  • Rear view camera zoom

    Enable/disable the rear view camera zoom to the trailer hitch.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Start animation

    The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.

    Values:

    • Alpina
    • BMW 1
    • BMW 2
    • BMW i
    • Christmas
    • Connected Drive 1
    • Connected Drive 2
    • M
    • Mini
    • Rolls Royce

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Tire pressure control

    The displayed values of the tire pressure control in the iDrive system. Please note that the car has to be equipped with the required sensors to make this work.

    Values:

    • Display pressure only
    • Display temperature and pressure
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Volume popup

    Enable/disable the volume popup that is displayed when the volume is changed.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

Display options instrument cluster
  • Average values reset

    The average speed and consumption is reset after the set time automatically.

    Values:

    • After 4 hours
    • After 8 hours
    • After every ride
    • Never

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

  • Digital speed in board computer

    Enable/disable the display of the digital speed in the board computer. Please toggle the displayed information in the board computer with the button in the indicator lever until the specific display appears.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

  • Empty menu item in board computer

    Enable/disable the empty menu item in the board computer.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

  • “Speed Limit Info” road sign type

    The road sign type of the “Speed Limit Info”. Please note that the car has to be equipped with the “Speed Limit Info” by factory.

    Values:

    • Country-specific
    • Default
    • White Europe
    • White USA

    For this option the following control unit has to be available in the car: “Camera-based Driver Assistance System” KAFAS

Doors/windows
  • Horn signal when locking the car with engine running

    Enable/disable the horn signal that sounds when locking the car with the engine running.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Lock doors automatically

    The doors are locked automatically when reaching the set speed.

    Values:

    • Not active
    • 2 km/h
    • 3 km/h
    • 5 km/h
    • 8 km/h
    • 10 km/h
    • 16 km/h
    • 20 km/h
    • 24 km/h
    • 30 km/h
    • 32 km/h
    • 40 km/h
    • 50 km/h

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Unlock doors automatically

    The doors are unlocked automatically when the key is removed. Please note that this only works if the doors have been locked automatically before.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

  • Window lifter interruption when opening a door

    Enable/disable the window lifter interruption when a door is opened.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

Driving assistance
  • Road edge warning

    Enable/disable the road edge warning of the lane departure warning.

    Values:

    • Curb stone only
    • Grass and curb stone
    • Grass only
    • Not active

    For this option the following control unit has to be available in the car: “Camera-based Driver Assistance System” KAFAS

Driving mode
  • Start in ECO mode

    Enable/disable the ECO driving mode as default.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Integrated Chassis Management” ICMQL

Fuel reserve warnings
  • Low fuel warning 1

    The remaining range at which the permanent low fuel warning is displayed.

    Values:

    • 10 kilometers
    • 10 miles
    • 20 kilometers
    • 20 miles
    • 30 kilometers
    • 30 miles
    • 40 kilometers
    • 50 kilometers
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

  • Low fuel warning 2

    The remaining range at which the temporary low fuel warning is displayed.

    Values:

    • 40 miles
    • 50 kilometers
    • 50 miles
    • 60 kilometers
    • 70 kilometers
    • 80 kilometers
    • 90 kilometers
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

HUD
  • HUD indicators (1 of 2)

    Enable/disable the indicators in the HUD. Please note that “HUD indicators (2 of 2)” in the “Headunit” ECU has to be enabled additionally. This function is not supported, if the car is equipped with a fully digital instrument cluster.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

  • HUD indicators (2 of 2)

    Enable/disable the indicators in the HUD. Please note that “HUD indicators (1 of 2)” in the “Instrument Cluster” ECU has to be enabled additionally. It may also be necessary to enable the corresponding checkbox in the HUD settings in the iDrive system in the car. This function is not supported, if the car is equipped with a fully digital instrument cluster.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_CICHB or “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • HUD music lists

    Enable/disable music lists in the HUD.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

  • HUD phone book

    Enable/disable the telephone book in the HUD.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

  • HUD telephone list

    Enable/disable the telephone list in the HUD.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

  • HUD voice input

    Enabled/disable voice input display in the HUD.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Instrument Cluster” KOMBI L6 BO

Headlight cleaning
  • Headlight cleaning blocking time

    The blocking time between headlight cleaning activations.

    Values:

    • 1 minute
    • 2 minutes
    • 3 minutes
    • 4 minutes
    • 5 minutes
    • 6 minutes
    • 7 minutes
    • 8 minutes
    • 9 minutes
    • 10 minutes

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Headlight cleaning pause between injection pulses

    The pause between the injection pulses of the headlight cleaning system.

    Values:

    • 200 ms
    • 400 ms
    • 600 ms
    • 800 ms
    • 1000 ms
    • 1200 ms
    • 1400 ms
    • 1600 ms
    • 1800 ms
    • 2000 ms

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Headlight cleaning system deactivation speed threshold

    The deactivation speed threshold at which the headlight cleaning system is deactivated.

    Values:

    • 10 km/h
    • 20 km/h
    • 30 km/h
    • 40 km/h
    • 50 km/h
    • 60 km/h
    • 70 km/h
    • 80 km/h
    • 90 km/h
    • 100 km/h
    • 110 km/h
    • 120 km/h
    • 130 km/h
    • 140 km/h
    • 150 km/h

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Headlight washers

    Activate/deactivate the headlight washers.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Number of washing operations for headlight cleaning

    The number of washing operations at which the headlight cleaning is turned on.

    Values:

    • 1 operation
    • 5 operations
    • 10 operations

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Number of water injection pulses during headlight cleaning

    The number of water injection pulses during headlight cleaning.

    Values:

    • 2 times
    • 3 times
    • 4 times
    • 5 times

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Water injection duration for headlight cleaning

    The duration of the water injection pulses of the headlight cleaning system.

    Values:

    • 200 ms
    • 400 ms
    • 600 ms
    • 800 ms
    • 1000 ms
    • 1200 ms
    • 1400 ms
    • 1600 ms
    • 1800 ms
    • 2000 ms

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Wipe cycles after front washing

    The number of wipe cycles after front washing

    Values:

    • 1 time
    • 2 times
    • 3 times
    • 4 times
    • 5 times

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

Indicators
  • One-touch indicator cycles

    The number of cycles of the one-touch indicator function.

    Values:

    • 1 time
    • 2 times
    • 3 times
    • 4 times
    • 5 times
    • 6 times

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

Lighting
  • Fog lights off with high beam

    Enable/disable the automatic switch-off of the fog lights when the high beam is turned on.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • High beam assistant automatic activation

    Enable/disable the automatic activation of the high beam assistant.

    Values:

    • Automatically
    • Manual

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Rain-light-sensor sensitivity

    The sensitivity of the rain-light-sensor that affects the automatic wiper and light activation.

    Values:

    • Insensitive
    • Normal
    • Sensititve
    • Very sensitive

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Sidemarkers

    Disable the sidemarkers in US cars. Use a backup to revert this coding once it has been applied.

    Values:

    • Deactivated

    For this option the following control unit has to be available in the car: “Headlight Driver Module left” TMS_03 or “Headlight Driver Module right” TMS_03

Mirrors
  • Automatic mirror tilt

    Enable/disable the automatic mirror tilt for the right mirror, when the reverse gear is engaged. For this function to work, the car has to be equipped with power folding mirrors. Make sure the button in the door for selecting the mirror is set to the driver side also.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Automatic mirror tilt value

    The tilt value of the right mirror, when the reverse gear is engaged.

    Values:

    • 10%
    • 20%
    • 30%
    • 40%
    • 50%
    • 60%
    • 70%
    • 80%
    • 90%
    • 100%

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Fold mirrors with convenient closing

    Enable/disable the folding of the mirrors when using convenient closing.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Mirror folding speed threshold

    The maximum speed at which the mirrors can be folded.

    Values:

    • 5 km/h
    • 10 km/h
    • 20 km/h
    • 30 km/h
    • 40 km/h
    • 50 km/h

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Mirror unfolding speed threshold

    The speed at which the mirrors are unfolded automatically.

    Values:

    • 5 km/h
    • 10 km/h
    • 20 km/h
    • 30 km/h
    • 40 km/h
    • 50 km/h

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Unfold mirrors with convenient opening

    Enable/disable the unfolding of the mirrors when using convenient opening.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Car Access System” CAS4_2

PDC
  • Activate PDC when rolling backwards

    Enable/disable the automatic activation of the PDC when the car starts rolling backwards.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “JBBF_E3_PDC” PMA_PDC or “Park Distance Control” PMA_PDC

  • PDC distance switch-off threshold

    The driven distance after the PDC is turned off automatically.

    Values:

    • 10 m
    • 20 m
    • 30 m
    • 40 m
    • 50 m
    • 100 m
    • 150 m
    • 200 m
    • 250 m

    For this option the following control unit has to be available in the car: “JBBF_E3_PDC” PMA_PDC

  • PDC distance switch-off threshold

    The driven distance after the PDC is turned off automatically.

    Values:

    • 10 m
    • 20 m
    • 30 m
    • 40 m
    • 50 m
    • 100 m
    • 150 m
    • 200 m
    • 250 m
    • Not active

    For this option the following control unit has to be available in the car: “Park Distance Control” PMA_PDC

  • PDC speed switch-off threshold

    The speed at which the PDC is turned off automatically.

    Values:

    • 5 km/h
    • 10 km/h
    • 15 km/h
    • 20 km/h
    • 30 km/h
    • 36 km/h
    • 40 km/h
    • 50 km/h

    For this option the following control unit has to be available in the car: “JBBF_E3_PDC” PMA_PDC or “Park Distance Control” PMA_PDC

Rear view camera
  • Rear view camera distance switch-off threshold

    The driven distance after the rear view camera is turned off automatically.

    Values:

    • 10 m
    • 20 m
    • 30 m
    • 40 m
    • 50 m
    • 100 m
    • 150 m
    • 200 m
    • 250 m
    • Not active

    For this option the following control unit has to be available in the car: “JBBF_E3_PDC” PMA_PDC or “Park Distance Control” PMA_PDC

  • Rear view camera speed switch-off threshold

    The speed at which the rear view camera is turned off automatically.

    Values:

    • 5 km/h
    • 10 km/h
    • 15 km/h
    • 20 km/h
    • 30 km/h
    • 36 km/h
    • 40 km/h
    • 50 km/h

    For this option the following control unit has to be available in the car: “JBBF_E3_PDC” PMA_PDC or “Park Distance Control” PMA_PDC

Seat heating
  • Front backrests temperature level 1

    The temperature of the front backrests for seat heating level 1.

    Values:

    • 30 °C
    • 31 °C
    • 32 °C
    • 33 °C
    • 34 °C
    • 35 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Front backrests temperature level 2

    The temperature of the front backrests for seat heating level 2.

    Values:

    • 36 °C
    • 37 °C
    • 38 °C
    • 39 °C
    • 40 °C
    • 41 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Front backrests temperature level 3

    The temperature of the front backrests for seat heating level 3.

    Values:

    • 42 °C
    • 43 °C
    • 44 °C
    • 45 °C
    • 46 °C
    • 47 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Front seats temperature level 1

    The temperature of the front seats for seat heating level 1.

    Values:

    • 30 °C
    • 31 °C
    • 32 °C
    • 33 °C
    • 34 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Front seats temperature level 2

    The temperature of the front seats for seat heating level 2.

    Values:

    • 35 °C
    • 36 °C
    • 37 °C
    • 38 °C
    • 39 °C
    • 40 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Front seats temperature level 3

    The temperature of the front seats for seat heating level 3.

    Values:

    • 41 °C
    • 42 °C
    • 43 °C
    • 44 °C
    • 45 °C
    • 46 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Rear backrests temperature level 1

    The temperature of the rear backrests for seat heating level 1.

    Values:

    • 30 °C
    • 31 °C
    • 32 °C
    • 33 °C
    • 34 °C
    • 35 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Rear backrests temperature level 2

    The temperature of the rear backrests for seat heating level 2.

    Values:

    • 36 °C
    • 37 °C
    • 38 °C
    • 39 °C
    • 40 °C
    • 41 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Rear backrests temperature level 3

    The temperature of the rear backrests for seat heating level 3.

    Values:

    • 42 °C
    • 43 °C
    • 44 °C
    • 45 °C
    • 46 °C
    • 47 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Rear seats temperature level 1

    The temperature of the rear seats for seat heating level 1.

    Values:

    • 30 °C
    • 31 °C
    • 32 °C
    • 33 °C
    • 34 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Rear seats temperature level 2

    The temperature of the rear seats for seat heating level 2.

    Values:

    • 35 °C
    • 36 °C
    • 37 °C
    • 38 °C
    • 39 °C
    • 40 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Rear seats temperature level 3

    The temperature of the rear seats for seat heating level 3.

    Values:

    • 41 °C
    • 42 °C
    • 43 °C
    • 44 °C
    • 45 °C
    • 46 °C

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Seat heating/cooling setting memory

    The memory duration of the seat heating/cooling settings.

    Values:

    • 15 minutes
    • 24 hours
    • Do not save
    • Unlimited

    For this option the following control unit has to be available in the car: “Seat Module Passenger” CBFS_PLX_1 or “Seat Module Driver” CFAS_PLX_1

Seatbelt reminder
  • Initial seat belt reminder after start

    Activate/deactivate the initial acoustic seat belt reminder after the car is started.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

  • Seat belt indicator driver seat

    Activate/deactivate the seat belt indicator in the instrument cluster for the driver seat.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

  • Seat belt indicator passenger seat

    Activate/deactivate the seat belt indicator in the instrument cluster for the passenger seat.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

  • Seat belt indicator rear seats

    Activate/deactivate the seat belt indicator in the instrument cluster for the rear seats.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

  • Seat belt reminder distance

    Driven distance at which th seat belt reminder is activated.

    Values:

    • 50 m
    • 100 m
    • 200 m
    • 500 m

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

  • Seat belt reminder driver seat

    Activate/deactivate the acoustic and visual seat belt reminder for the driver seat.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

  • Seat belt reminder duration

    Duration at which the seat belt reminder stays active.

    Values:

    • 5 seconds
    • 10 seconds
    • 15 seconds
    • 20 seconds
    • 30 seconds
    • 45 seconds
    • 60 seconds
    • 90 seconds

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

  • Seat belt reminder passenger seat

    Activate/deactivate the acoustic and visual seat belt reminder for the passenger seat.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

  • Seat belt reminder speed

    Speed at which th seat belt reminder is activated.

    Values:

    • 8 km/h
    • 10 km/h
    • 20 km/h
    • 30 km/h
    • 40 km/h
    • 50 km/h

    For this option the following control unit has to be available in the car: “Advanced Crash Safety Module” ACSM_4C

Side view camera
  • Activation speed threshold side view camera

    The speed at which the side view camera can be activated.

    Values:

    • 15 km/h
    • No speed limit

    For this option the following control unit has to be available in the car: “Top, Rear, Side View Camera” iCAM or “Top, Rear, Side View Camera” TRSVC

  • Deactivation speed threshold side view camera

    The speed at which the side view camera is deactivated.

    Values:

    • 15 km/h
    • No speed limit

    For this option the following control unit has to be available in the car: “Top, Rear, Side View Camera” iCAM or “Top, Rear, Side View Camera” TRSVC

Sport Displays
  • Sport Displays

    Enable/disable the Sport Displays in the iDrive system. Please note that the Sport Displays are not working in all cars, depending on the engine.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_CICHB or “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Sport Displays color

    The color of the Sport Displays in the iDrive system.

    Values:

    • Orange
    • Red

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

Tailgate
  • Close tailgate with button in the driver door

    Enable/disable closing the tailgate with the button in the storage compartment in the driver door.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Tailgate Function Module” HKFM or “Tailgate Function Module” HKL_III

  • Close tailgate with button in the driver door without long press

    Enable/disable the closing of the tailgate with the button in the storage compartment in the driver door without a long press.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Tailgate Function Module” HKFM2

  • Close tailgate with remote control

    Enable/disable closing of the tailgate with the remote control.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Tailgate Function Module” HKFM or “Tailgate Function Module” HKL_III

  • Close tailgate with remote without long press

    Enable/disable closing the tailgate with the remote control without a long press.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Tailgate Function Module” HKFM or “Tailgate Function Module” HKL_III

  • Close tailgate with the remote control without long press

    Enable/disable closing the tailgate without a long press of the button on the remote control.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Tailgate Function Module” HKFM2

  • Tailgate function remote control

    The tailgate function that is triggered when the button on the remote is pressed.

    Values:

    • Open
    • Open and close

    For this option the following control unit has to be available in the car: “Tailgate Function Module” HKFM2

  • Tailgate function when pulling the button in the driver door

    The tailgate function that is triggered when the button in the storage compartment in the driver door is pulled up.

    Values:

    • Close
    • Deactivated

    For this option the following control unit has to be available in the car: “Tailgate Function Module” HKFM2

  • Tailgate function when pushing the button in the driver door

    The tailgate function that is triggered when the button in the storage compartment in the driver door is pushed down.

    Values:

    • Deactivated
    • Open
    • Open and close

    For this option the following control unit has to be available in the car: “Tailgate Function Module” HKFM2

Transmission
  • Sport Automatic Transmission

    Enable/disable the Sport Automatic Transmission.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Transmission Control Unit” GKEB23

Video
  • Additional video codecs and formats

    Activate additional video codecs and formats (Ogg, Xvid and VCD). Use a backup to revert this coding once it has been applied.

    Values:

    • Active

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

  • Video in motion

    Activate video in motion. Use a backup to revert this coding once it has been applied.

    Values:

    • Active

    For this option the following control unit has to be available in the car: “Headunit” HU_CICHB or “Headunit” HU_NBT

  • Video in motion

    Enable video in motion. Please note the instructions displayed after coding.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT_EVO

  • Video via USB

    Enable video playback from USB storage media. Use a backup to revert this coding once it has been applied.

    Values:

    • Active

    For this option the following control unit has to be available in the car: “Headunit” HU_NBT or “Headunit” HU_NBT_EVO

Voltage monitoring
  • Brake light cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Brake light lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Brake light warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Fog light lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Fog lights cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Fog lights warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • High beam cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • High beam lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • High beam warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Indicator front cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Indicator front lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Indicator front warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Indicator rear cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Indicator rear lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Indicator rear warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • License plate light cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • License plate light lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • License plate light warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Low beam cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Low beam lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Low beam warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Position light cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Position light lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Position light warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Rear fog light left cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Rear fog light left lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Rear fog light left warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Rear fog light right cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Rear fog light right lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Rear fog light right warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Reversing light left cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Reversing light left lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Reversing light left warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Reversing light right cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Reversing light right lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Reversing light right warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Tail lights cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Tail lights inner cold monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Tail lights inner lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Tail lights inner warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Tail lights lamp

    Values:

    • Bulb
    • LED

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Tail lights warm monitoring

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

Welcome lights
  • Welcome Light lighting duration

    The lighting duration of the Welcome Light.

    Values:

    • 5 seconds
    • 10 seconds
    • 15 seconds
    • 20 seconds
    • 30 seconds
    • 45 seconds
    • 60 seconds

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Welcome lights fog lights

    The fog lights are turned on with the Welcome lights.

    Values:

    • Hard on
    • Not active
    • Soft on (bulb)
    • Soft on (LED)

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Welcome lights high beam

    The high beam is turned on with the Welcome lights.

    Values:

    • Hard on
    • Not active
    • Soft on (bulb)
    • Soft on (LED)

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Welcome lights license plate lights

    The license plate lights are turned on with the Welcome lights.

    Values:

    • Hard on
    • Not active
    • Soft on (bulb)
    • Soft on (LED)

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Welcome lights low beam

    The low beam is turned on with the Welcome lights.

    Values:

    • Hard on
    • Not active
    • Soft on (bulb)
    • Soft on (LED)

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Welcome lights sidemarkers

    The sidemarkers are turned on with the Welcome lights.

    Values:

    • Hard on
    • Not active
    • Soft on (bulb)
    • Soft on (LED)

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

  • Welcome lights taillights

    The taillights are turned on with the Welcome lights.

    Values:

    • Hard on
    • Not active
    • Soft on (bulb)
    • Soft on (LED)

    For this option the following control unit has to be available in the car: “Footwell Module” FRM__03CT

Window cleaning
  • Complete wiper cycle

    Enable/disable the completion of the wiper cycle when the car is turned off.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Wipe cycles after rear washing

    The number of wipe cycles after rear washing.

    Values:

    • 1 time
    • 2 times
    • 3 times
    • 4 times
    • 5 times

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE

  • Wiper level switch back when stationary

    Enable/disable the automatic switch back of the wiper level when the car becomes stationary.

    Values:

    • Active
    • Not active

    For this option the following control unit has to be available in the car: “Junction Box Passenger” JBBFE